Preventive Maintenance Of Air Conditioning Units
There should be a regular maintenance of your air conditioning units. As the saying in health goes, prevention is better than cure. The same applies for air conditioning units. Preventive maintenance is far easier than fixing problems in the future. Residential air conditioning systems have an average functioning span of eleven to fourteen years. But if proper maintenance is observed, they can be of use for a longer period without the need for repairs.
Residential air conditioning systems that are used to both cool and heat homes must be maintained during fall and spring season each year. Once a year maintenance is required for those units used for cooling purposes only, specifically on a time before the season necessitating cooling begins.
Preventive maintenance of your air conditioning units can be summarized in 3 simple steps. Use these steps as your checklist in carrying out the maintenance work systematically to save you from sudden irritating breakdowns. To follow through with the 3 steps, I suggest that you use a trusted HVAC contractor.
Step 1: Check the outdoor units
The complete system must be checked for a sufficient level of refrigerant with the help of a technician. The waste must be removed from inside the cabinet, including the drain openings and the coil. The fan blades, control box, wire networks and the motor, as well as the compressor and attached tubes must be checked for obvious signs of deterioration. It is advised that you make sure all the electrical units are functioning correctly and safely.
Step 2: Inspect the indoor units
Clean and provide lubrication to the blower wheels and motor if needed. If there is one defective part, replace it immediately. Also clean the debris from the combustion blower. If your unit has a heating capacity, then make sure you inspect the ignition system and the blower for gas leaks. The fuel system must be properly secured to the heater to ensure proper functioning of the unit. See ac repair coral springs. Look for obvious signs of damage and dislodged parts, clean the air filters, and check the wiring connections. Overall inspection of the system is necessary to check for possible leakages in the airflow system.
Step 3: Inspect the system while it is operating
Observe the starting characteristics of the unit when you switch it on. Check for any abnormality, focusing on the noise it makes, and any unusual odor. Then measure the temperature and regulate the airflow according to the point preferred. For proper airflow, also check the vents and air conditioning coral springs and openings in your home. The energy load needed by the unit to function is also another important inspection to make.
Air conditioning units must be maintained regularly to avoid sudden system breakdowns, especially at times when you need your units to function the most.